Material and feed size
Share material properties, initial size and heat sensitivity.
Raw material processing · Product Detail
WF-C Series Dust Collecting Crushing Set
The WF-C Series is a fully enclosed crushing set designed for fine grinding, low dust loss, convenient cleaning and stable operation.
Selection Inputs
WF-C Series Dust Collecting Crushing Set Selection Inputs
Confirm these project inputs before model and configuration review.
Particle-size target
Define required fineness, mesh range and throughput.
Dust and containment
Confirm dust collection, containment and room requirements.
Cleaning and downstream scope
Confirm cleaning method and downstream transfer arrangement.
Features
Machine Features
- 01
High fineness and strong adaptability to materials. Because this type of machine adopts a unique grinding method, especially the fibrous, high-toughness materials and high-hardness materials that are difficult to crush, they can obtain good crushing results. The knife set is made of high-quality steel with good wear resistance; the grinding tiles are arranged at a certain angle after rigorous calculation according to the material movement mode, which can speed up the crushing speed, reduce the amount of slag, and prolong the mission.
- 02
Good stability and low noise. This type of machine adopts a "unidirectional dispersion" design structure, so there is no vibration, no need to fix, and it is very convenient to use.
- 03
No dust, low loss, easy cleaning, and high safety performance. This type of machine adopts a fully enclosed design structure with no dead corners; the lower part of the crushing chamber is lined with a wear-resistant stainless steel plate, and the center is set with a dust cover to effectively prevent dust from entering the motor; grinding; Both the tile and the knife set are easy to disassemble, which is easy to clean and prevent the adhesion between different materials. Without a fan, the air flow is caused by the rotation of the knife set, so there is no dust and no dust removal equipment is required.
- 04
The screen is made of hard stainless steel with precision perforation, with larger hole density and better powder permeability.
Technical Parameters
Main Technical Parameters
| Model | WF-15C | WF-30C | WF-60C | WF-80C |
|---|---|---|---|---|
| Capacity(kg/h) | 10-200 | 30-800 | 50-1200 | 100-1500 |
| Material Size (mm) | ＜10 | ＜15 | ＜15 | ＜15 |
| Product Size(mesh) | 80-320 | 80-320 | 80-300 | 80-300 |
| Total Power(kw) | 14.3 | 38.85 | 69.6 | 87.6 |
| Main Revolution(r/min) | -6000 | -3800 | -2800 | -2500 |
| Overall Dimension (L * W * H)(mm) | 4200*1200*2700 | 6640*1300*3960 | 7500*2300*4530 | 9000*2300*4530 |
| Weight(kg) | 850 | 1500 | 3200 | 3700 |
FAQ
What should be confirmed before selecting the WF-C Series Dust Collecting Crushing Set?
Confirm material properties, batch or throughput target, process objective, utilities, cleaning requirements and downstream interfaces.
Can the machine be selected from nominal capacity alone?
No. Material behavior, filling ratio, particle target, utilities and installation conditions also affect the final configuration.
What information should be included in an inquiry?
Share the material, starting condition, target output with units, required result, utilities, destination market and line scope.
RFQ Inputs
Prepare Your Inquiry
Share these inputs so the Aligned team can review the machine and project scope.
- Material and feed size
- Particle-size target
- Dust and containment
- Cleaning and downstream scope
- Available utilities and destination market
- Required documentation and project timeline
Project Discussion
Discuss Your Requirements
Share your material, process target, output and project requirements with the Aligned team.