Material and feed size
Share material properties, initial size and heat sensitivity.
Raw material processing · Product Detail
WF-B Series Dust Collecting Crushing Set
The WF-B Series combines material crushing with dust collection and supports multiple crushing mechanisms for different materials.
Selection Inputs
WF-B Series Dust Collecting Crushing Set Selection Inputs
Confirm these project inputs before model and configuration review.
Particle-size target
Define required fineness, mesh range and throughput.
Dust and containment
Confirm dust collection, containment and room requirements.
Cleaning and downstream scope
Confirm cleaning method and downstream transfer arrangement.
Features
Machine Features
- 01
Diversified crushing mechanisms: toothed disc type, turbine type, air-cooled type, blade type and hammer type, suitable for various materials.
- 02
It can be equipped with a cyclone separator and a dust collector, and there is no dust flying during the production process, the fine powder retained by the dust collection bag can be effectively recovered, reducing the loss rate of materials.
- 03
The easy-to-remove screen can achieve different degrees of crushing thickness.
- 04
The shell of the pulverizer can be equipped with jacket cooling water, which is suitable for highly heat-sensitive materials.
Technical Parameters
Main Technical Parameters
| Model | WF-20B | WF-30B | WF-40B | WF-60B |
|---|---|---|---|---|
| Production Capacity (kg/h) | 60-150 | 100-300 | 160-800 | 250-1200 |
| Spindle Speed (r/min) | 4500 | 3800 | 3400 | 2800 |
| Feed Size (mm) | ≤6 | ≤6 | ≤6 | ≤10 |
| Crushing Fineness (Mesh) | 60-120 | 60-120 | 60-120 | 60-120 |
| Crushing Motor (kw) | 4 | 5.5 | 1 | 22 |
| Dust Collection Motor (kw) | 0.75 | 0.75 | 1.5 | 3 |
| Dimensions (Length * Width * Height) (mm) | 1100*600*1650 | 1200*650*1650 | 1350*700*1700 | 1750*1100*1950 |
FAQ
What should be confirmed before selecting the WF-B Series Dust Collecting Crushing Set?
Confirm material properties, batch or throughput target, process objective, utilities, cleaning requirements and downstream interfaces.
Can the machine be selected from nominal capacity alone?
No. Material behavior, filling ratio, particle target, utilities and installation conditions also affect the final configuration.
What information should be included in an inquiry?
Share the material, starting condition, target output with units, required result, utilities, destination market and line scope.
RFQ Inputs
Prepare Your Inquiry
Share these inputs so the Aligned team can review the machine and project scope.
- Material and feed size
- Particle-size target
- Dust and containment
- Cleaning and downstream scope
- Available utilities and destination market
- Required documentation and project timeline
Project Discussion
Discuss Your Requirements
Share your material, process target, output and project requirements with the Aligned team.