Material starting condition
Share material properties, moisture and thermal sensitivity.
Raw material processing · Product Detail
DPL Series Fluid Bed Dryer
DPL Series fluid bed dryer combines mixing and drying inside the machine for pharmaceutical material processing.
Selection Inputs
DPL Series Fluid Bed Dryer Selection Inputs
Confirm these project inputs before model and configuration review.
Batch and output target
Define batch quantity, processing time and required output.
Process target
Confirm drying, granulation or particle-quality requirements.
Utilities and cleaning
Confirm air, heat, exhaust, cleaning and installation conditions.
Features
Machine Features
- 01
Modular design, the machine is equipped with top, bottom, and side spray systems, which can realize functions such as drying, granulating, coating, and pelletizing.
- 02
The machine has a compact design, is easy to disassemble and clean, has no sanitary corners, and meets the requirements of cGMP production specifications.
- 03
The temperature control is accurate and the fluctuation range is small; the double chamber shakes the bag to clean the powder to ensure the continuous fluidization state.
- 04
Graphical interface and PLC automatic control are adopted, the operation is simple, all operations can be completed according to the set parameters, and the process data can be recorded and printed for analysis.
- 05
The specially designed air distribution plate makes the air distribution more even, better fluidization, more stable product quality and good reproducibility.
Technical Parameters
Main Technical Parameters
| Parameter group | Model | DPL-ⅡA | DPL3/5 |
|---|---|---|---|
| Material Container | Top Spray （L） | 9 | 18.5 |
| Bottom-Spray（L） | 5 | 10 | |
| Side Spray （L） | 7.5 | 9 | |
| Capacity | Top Spray（Kg/batch） | 0.5-3 | 1.5-5 |
| Bottom-Spray（Kg/batch） | 0.25-2 | 0.5-3 | |
| Side Spray （Kg/batch） | 0.5-2 | 1-2.5 | |
| Compressed Air | Pressure Mpa | 0.4-0.6 | 0.4-0.6 |
| Onsumption M³/min | 0.4 | 0.5 | |
| Blower Power(Kw) | 4 | 5.5 | |
| Heating Power(Kw) | 4.5 | 12 | |
| Overall Dimensions | L（mm） | 1800 | 2250 |
| W（mm） | 860 | 1050 | |
| H（mm） | 2385 | 2850 | |
| diameter（mm） | 300 | 400 |
FAQ
What should be confirmed before selecting the DPL Series Fluid Bed Dryer?
Confirm material properties, batch or throughput target, process objective, utilities, cleaning requirements and downstream interfaces.
Can the machine be selected from nominal capacity alone?
No. Material behavior, filling ratio, particle target, utilities and installation conditions also affect the final configuration.
What information should be included in an inquiry?
Share the material, starting condition, target output with units, required result, utilities, destination market and line scope.
RFQ Inputs
Prepare Your Inquiry
Share these inputs so the Aligned team can review the machine and project scope.
- Material starting condition
- Batch and output target
- Process target
- Utilities and cleaning
- Available utilities and destination market
- Required documentation and project timeline
Project Discussion
Discuss Your Requirements
Share your material, process target, output and project requirements with the Aligned team.