Formula and material behavior
Share the formulation, viscosity, particle-size target and temperature sensitivity.
Ointment machines · Vacuum Emulsifying & Mixing
ALRJ Series Vacuum Emulsifier Mixer
Review the customer-supplied ALRJ series features and technical parameters for vacuum emulsifying and mixing projects.
Selection · Vacuum Emulsifying & Mixing
Vacuum Emulsifying & Mixing Selection Inputs
Confirm these role-specific project inputs before model and configuration review.
Batch and process
Confirm working batch, charging sequence, mixing, emulsifying and vacuum requirements.
Transfer and cleaning
Define discharge, holding, transfer distance and cleaning boundary.
Utilities and installation
Confirm power, room access, controls and required documentation.
Features · Source-as-provided
Machine Features
- 01
The emulsifying head can be customized according to the size of the material particles to meet different needs, and the minimum can reach nanometers and microns.
- 02
After the emulsification pot lid is raised, the safety device is activated: the power system of the stirring device will not be started. To avoid causing personal injury.
- 03
The vacuum emulsifier uses a three-stage stirring system. The entire emulsification process is in a vacuum environment, which can not only eliminate the foam generated during the emulsification process, but also avoid unnecessary pollution.
- 04
PLC control, easy to operate, freely adjust temperature, time, etc., and automatically record historical temperature
- 05
The vacuum emulsifier is equipped with a CIP cleaning system, making cleaning simple and effective.
- 06
The modular design of the mixing shaft can be freely assembled and easy to maintain and clean.
Source-as-provided
Main Technical Parameters
Values, spellings, claims and units are reproduced as provided by the customer; suspected issues are listed separately for confirmation.
| Model | Volume | Emulsify motor | Mixer of oil water pot | Length | Width | Height | Max height |
|---|---|---|---|---|---|---|---|
| CB-10 | 10L | 1.1KW 0-3500rpm/min | 0.37Kw 0-60r/m | 1200 | 600 | 1300 | 1700 |
| CB-20 | 20L | 1.5KW 0-3500rpm/min | 0.75Kw 0-60r/m | 1500 | 800 | 1500 | 2050 |
| CB-50 | 50L | 3KW 0-3500rpm/min | 0.75Kw 0-60r/m | 2750 | 2100 | 1900 | 2600 |
| CB-100 | 100L | 3KW 0-3500rpm/min | 1.5Kw 0-60r/m | 2900 | 2100 | 2100 | 2800 |
| CB-200 | 200L | 4KW 0-3500rpm/min | 1.5Kw 0-60r/m | 2850 | 2200 | 2200 | 3100 |
| CB-300 | 300L | 5.5KW 0-3500rpm/min | 2.2Kw 0-60r/m | 2850 | 2200 | 2500 | 3550 |
| CB-500 | 500L | 7.5KW 0-3500rpm/min | 2.2Kw 0-60r/m | 3800 | 2800 | 2700 | 3950 |
| CB-750 | 750L | 11KW 0-3500rpm/min | 3.7Kw 0-60r/m | 3900 | 3900 | 2900 | 4400 |
| CB-1000 | 1000L | 11KW 0-3500rpm/min | 7.5Kw 0-60r/m | 3900 | 3900 | 3200 | 4550 |
| CB-2000 | 2000L | 22KW 0-3500rpm/min | 7.5Kw 0-60r/m | 4850 | 4300 | 3600 | 4700 |
FAQ
What should be confirmed before selecting the ALRJ Series Vacuum Emulsifier Mixer?
Confirm the product, process or package specification, target capacity, utilities, cleaning boundary and project interfaces.
Can nominal capacity alone determine the final model?
No. Material behavior, process or tube requirements, utilities and interfaces also affect selection.
What should be included in an inquiry?
Share the vacuum emulsifying & mixing inputs listed on this page, destination market, documentation needs and project timeline.
RFQ · Vacuum Emulsifying & Mixing
Prepare Your Inquiry
Share these role-specific inputs so the Aligned team can review the equipment and project scope.
- Formula and material behavior
- Batch and process
- Transfer and cleaning
- Utilities and installation
- Destination market and documentation
- Required line scope and project timeline
Project Discussion
Discuss Your Ointment Equipment Requirements
Share product, process, package, output, utility and project-scope requirements with the Aligned team.
