Film formulation
Share formulation, target dose, viscosity and coating behavior.
ODF machines · Film Forming
ZM340-10M OTF & Transdermal Patch Making Machine
ZM340-10M equipment can produce Oral thin film and Transdermal Patch. Its output is three times that of medium-scale equipment, and it is the equipment with the largest output at present. Suitable for medicine, cosmetics, and health care products industries. The equipment adopts frequency conversion speed regulation and automatic control technology integrated with machine, electricity and gas, and is designed in strict accordance with the “GMP” standard and “UL” safety standard of the pharmaceutical industry.
Selection · Film Forming
Film Forming Selection Inputs
Confirm these role-specific project inputs before model and configuration review.
Web and finished film
Define coating width, roll dimensions, film thickness and finished format.
Drying and output
Confirm drying conditions, target speed and environmental controls.
Modules and interfaces
Confirm unwinding, coating, laminating, slitting, rewinding and line interfaces.
Features · Source-as-provided
Machine Features
- 01
It is suitable for the composite production of paper, film, and metal film coatings.The power system of the whole machine adopts a frequency converter stepless speed regulation system. Unwinding adopts magnetic powder brake tension control
- 02
Adopt main body plus accessory module structure, each module can be disassembled and installed separately. Installation using cylindrical pin positioning, screw fixation, easy assembly.
- 03
The equipment has automatic working length recording and speed display.
- 04
Independent partition of drying oven, with independent automatic control of temperature, humidity, concentration and other functions, to ensure efficient and high quality production.
- 05
The lower transmission area and upper operation area of the equipment are completely sealed and isolated by stainless steel plates, which avoids cross-contamination between the two sections when the equipment is working, making it easier to clean.
- 06
All the parts in contact with the material, including the pressing roller and the drying tunnel, are made of stainless steel and non-toxic materials, which meet the requirements and specifications of "GMP". All electrical components, wiring and operation schemes comply with "UL" safety standards.
- 07
Equipment emergency stop safety device, improve the safety of the operator in debugging and mold change.
- 08
It has a one-stop assembly line for unwinding, coating, drying, laminating and rewinding, with smooth technology and intuitive production process.
- 09
The switchboard adopts split structure, and the drying area can be customized and lengthened to make the operation more smooth.
Source-as-provided
Main Technical Parameters
Values, spellings, claims and units are reproduced as provided by the customer; suspected issues are listed separately for confirmation.
| Parameter | Value 1 |
|---|---|
| Production width | 280mm |
| Roll surface width | 350mm |
| Speed | 1m-2.5m/minDepends on the actual material and status |
| Unwinding diameter | ≤φ350mm |
| Rewinding diameter | ≤φ350mm |
| Heating and drying method | Built-in hot air drying, centrifugal fan hot air exhaust |
| Temperature control | RT-99℃ ±2℃ |
| Edge thickness | ±1.0mm |
| Power | 60KW |
| External dimensions | 9000*1620*2050mm |
| Voltage | 380V 50HZ |
FAQ
What should be confirmed before selecting the ZM340-10M OTF & Transdermal Patch Making Machine?
Confirm film formulation, web and finished film, drying and output, modules and interfaces.
Can the final configuration be selected from nominal output alone?
No. Material behavior, product format, operating conditions, utilities and interfaces also affect the final configuration.
What information should be included in an inquiry?
Share the film forming inputs listed on this page, destination market, documentation needs and required line scope.
RFQ · Film Forming
Prepare Your Inquiry
Share these role-specific inputs so the Aligned team can review the equipment and line scope.
- Film formulation
- Web and finished film
- Drying and output
- Modules and interfaces
- Destination market and documentation
- Required line scope and project timeline
Project Discussion
Discuss Your ODF Requirements
Share film, format, output, utility and line-scope requirements with the Aligned team.
