Capsule and defect scope
Confirm capsule sizes and the defects that must be polished, sorted or rejected.
Capsule machines · Polishing
JFP-110A Series Vertical Capsule Polisher
The JFP-110A combines capsule polishing, static elimination and negative-pressure rejection of specified capsule defects.
Selection
JFP-110A Series Vertical Capsule Polisher Selection Inputs
Confirm these project inputs before model and configuration review.
Required throughput
Share upstream output and the required capsules-per-hour handling rate.
Inlet, outlet and elevation
Confirm connection heights, chute orientation and downstream interface.
Air, vacuum and cleaning
Confirm compressed-air, negative-pressure and cleaning requirements.
Features
Machine Features
- 01
This capsule sorting and polishing equipment removes dust from the surface of the capsules, improves smoothness and helps eliminate static electricity.
- 02
A novel negative-pressure waste rejection device automatically removes capsules with slight defects, empty shells, fragments and body caps.
- 03
Suitable for all types of capsules.
- 04
Parts in contact with the capsules and medicines are made of 304 stainless steel, and the machine fully complies with GMP standards.
Main Technical Parameters
| Parameter | Value |
|---|---|
| Output | 150,000 pcs/hour |
| Power | 220V 50 /60HZ，1P，0.18kw |
| Weight | 60kg |
| Net Weight | 40kg |
| Negative Pressure | 2.7m3 /min -0.014Mpa |
| Compressed Air | 0.25m3 /min 0.3Mpa |
| Overall Dimension | 800*500*1000mm |
| Package Dimension | 870*600*720mm |
FAQ
What should be confirmed before selecting the JFP-110A Series Vertical Capsule Polisher?
Confirm capsule format, material or defect scope, target output, utilities, installation conditions and line interfaces.
Can the final configuration be selected from nominal output alone?
No. Capsule format, material behavior, operating conditions, utilities and interfaces also affect the final configuration.
What information should be included in an inquiry?
Share capsule size, material or polishing requirement, target output with units, utilities, destination market and line scope.
RFQ · Capsule Polishing
Prepare Your Inquiry
Share these inputs so the Aligned team can review the equipment and line scope.
- Capsule and defect scope
- Required throughput
- Inlet, outlet and elevation
- Air, vacuum and cleaning
- Destination market and documentation
- Required line scope and project timeline
Project Discussion
Discuss Your Capsule Requirements
Share capsule, material, output, utility and line-scope requirements with the Aligned team.
